|
♦ Engine Coolant (3.0L
Diesel Engines)
|
Mopar Engine Coolant/ Antifreeze 10 Year/150,000 Mile Formula OAT
(Organic Additive Technology)
|
11.6 Quarts
|
11.0 Liters
|
68163848AB
|
68163848GB
|
|
♦ Engine Coolant (3.6L
Engine)
|
Mopar Engine Coolant/
Antifreeze 10 Year/150,000 Mile Formula OAT (Organic Additive Technology)
|
13.7 Quarts
|
13 Liters
|
68163848AB
|
68163848GB
|
|
♦ Engine Coolant (5.7L
Engines - 1500 Models)
|
Mopar Engine Coolant/
Antifreeze 10 Year/150,000 Mile Formula OAT (Organic Additive Technology)
|
18.3 Quarts
|
17.3 Liters
|
68163848AB
|
68163848GB
|
|
Engine Oil with
Filter
|
|
Engine Oil (3.0L Diesel)
|
We recommend you use 5W-40
synthetic engine oil such as Mopar or Shell Rotella that meets FCA
Material Standard MS-10902 and the API CJ-4 or ACEA E9/E7 or ACEA
A3/B4 engine oil category is required.
|
10.5 Quarts
|
10 Liters
|
68001332PB
|
68231021GB
|
|
Engine Oil (3.6L Engines)
|
We recommend you use
API Certified SAE 5W-20 Engine Oil, meeting the requirements of FCA
Material Standard MS-6395 such as Mopar, Pennzoil, and Shell Helix.
Refer to your engine oil filler cap for correct SAE grade. Mopar SAE
5W-30 engine oil approved to Material Standard MS-6395 may be used
when SAE 5W-20 engine oil meeting MS-6395 is not available.
|
6 Quarts
|
5.6 Liters
|
68218890AB
|
68218890GB
|
|
Engine Oil (5.7L Engine)
|
We recommend you use
API Certified SAE 5W-20 Engine Oil, meeting the requirements of Material
Standard MS-6395 such as Mopar, Pennzoil, and Shell Helix. Refer to
your engine oil filler cap for correct SAE grade.
|
7 Quarts
|
6.6 Liters
|
68218890AB
|
68218890GB
|
|
Fuel Selection
|
|
Fuel Selection (3.6L Engine)
|
87 Octane, 0-15% Ethanol
|
—
|
—
|
|
Fuel Selection (3.6L Flex Fuel E-85 Engine)
|
87 Octane, Up
To 85% Ethanol
|
—
|
—
|
|
Fuel Selection (5.7L)
|
89 Octane Recommended
- 87 Octane Acceptable, 0-15% Ethanol
|
—
|
—
|
|
Fuel Selection (3.0L Diesel
Engine)
|
Use good quality diesel fuel from a reputable supplier in your
vehicle. Federal law requires that you must fuel this vehicle with
Ultra Low Sulfur Highway Diesel fuel (15 ppm Sulfur maximum) and prohibits
the use of Low Sulfur Highway Diesel fuel (500 ppm Sulfur maximum)
to avoid damage to the emissions control system. For most year-round
service, No. 2 diesel fuel meeting ASTM specification D-975 Grade
S15 will provide good performance. We recommend you use a blend of
up to 5% biodiesel, meeting ASTM specification D-975 with your diesel
engine.This vehicle is compatible with biodiesel blends greater than
5% but no greater than 20% biodiesel meeting ASTM specification D-7467
provided the shortened maintenance intervals are followed as directed.
|
—
|
—
|
|
Fuel Filters
|
|
Fuel Filters (3.0L Diesel Engine)
|
We recommend you use Mopar Fuel Filter. Must meet 3 micron rating.
Using a fuel filter that does not meet the manufacturers filtration
and water separating requirements can severely impact fuel system
life and reliability.
|
—
|
—
|
|
Fuel Capacity
(approximate)
|
|
Description
|
U.S.
|
Metric
|
Part Number
|
Global Part Number
|
|
1500 Regular Cab Shortbed/Crew Quad Cab Models
|
26 Gallons
|
98 Liters
|
—
|
—
|
|
1500 Regular Cab Longbed/Crew Quad Cab Models (Optional)
|
32 Gallons
|
121 Liters
|
—
|
—
|
|
Diesel Exhaust Fluid
(DEF)
|
|
3.0L Diesel Engine (All Models)
|
Mopar Diesel Exhaust Fluid (API Certified)
(DEF) or equivalent that has been API Certified to the ISO 22241 standard.
Use of fluids not API Certified to ISO 22241 may result in system
damage.
|
8 Gallons
|
30.3 Liters
|
68035704AC
|
—
|
|
A/C Refrigerant System
|
|
Engine
|
R-1234yf Capacity
|
Part Number
|
Global Part Number
|
|
3.0L/3.6L/5.7L
|
510g (1.13 lb.)
|
–
|
–
|
|
A/C Compressor Oil (3.0L/3.6L/5.7L)
|
ND-12
|
68224150AB
|
–
|
|
♦ System fill capacity includes heater and coolant recovery bottle
filled to MAX level.
|
|
| CAUTION: |
Nominal refill capacities are
shown. A variation may be observed from vehicle to vehicle due to
manufacturing tolerance and refill procedure.
|
|