PLEASE PROVIDE A COPY OF THIS
SHEET TO THE SERVICING TECHNICIAN.
PRIOR TO ORDERING THIS PART, THE FOLLOWING MUST BE VERIFIED:
Tech Tip Part Description: Window Regulators -Front and Rear Door
Tech Tip Description: BINDING: If the front or rear door glass is binding in the up or down direction, please follow these steps prior to replacing the window regulator. - Verify the glass run seals are fully seated into the metal channel. Especially inside the door below the belt line, front and rear. - Cycle the window regulator to a mid position where you have access to the window regulator glass clamps that hold the glass. Loosen the glass clamps and push the glass towards the B-pillar. Make sure the glass is fully seated into the clamps, and re-tighten the glass clamps to the proper torque. - Cycle the glass to verify that the issue is resolved. If not, proceed with replacing the window regulator.
SQUEAKING NOISE (Vehicles built prior to Oct. 8, 2007): If the customer complaint is that there is a squeaking noise heard from the front or rear window regulators, please follow the directions in TSB 23-028-08.
______________________________________
Contact Us at CAGRIS@Chrysler.com for feedback related ONLY to this GPOP Tech Tip. DO NOT email regarding repair procedures unrelated to this Tech Tip or part order inquires. Please include the Part Number (s) and Tech Tip Part Description of the Tech Tip you are referencing for our tracking system.
CHRYSLER RESERVES THE RIGHT TO BACK CHARGE DEALERS THAT DO NOT COMPLY WITH CHRYSLER WARRANTY AND POLICY PROCEDURES AS OUTLINED IN THE DEALER P&P MANUAL
StarParts® is a registered trademark of Chrysler.
© 2022 Chrysler Group LLC, All rights reserved.