A: For the ST refer to Technical Service Bulletin # 08-017-02 for part numbers and installation instructions. For KJ & WJ, use kit numnber 4595823AB. - Updated: October 11, 2002
A: Engineering indicates that equipment that is part of the sheetmetal and electronics of the Durango can only be installed in production. Vehicles with the XRW sales code package are required for DVD rear seat video installation. - Updated: May 17, 2002
A: Understand that these vehicles are different than their counterparts. These "special editions" have equipment that interferes with some of the Accessories. For the Overland model, the OEM rock rails interfere with running board, side step, and molded splash guard installation, and cannot be used. For the 300M Special, the ground effects interfere with molded splash guard, front end cover, hitch, and door edge guard installation, and cannot be used. If splash guards are desired for these vehicles, the molded flat splash guard design can still be used. - Updated: May 17, 2002
A: Engineering indicates that the Special Edition uses the same OEM side cladding and bumpers as the Limited models, therefore you can use the Limited model running boards on the Laredo Special edition. - Updated: May 17, 2002
A: Mopar Specifying can assist on part number and model verification for accessory part numbers, however, product, and installation related questions should be directed to the Mopar Marketing hotline: 1-800-84-MOPAR. - Updated: May 17, 2002
A: You should first check to see if there is a Catalog Group 1, "Component Parts for Mopar Accessories" for the model vehicle. If there is, check this catalog first. If the parts are not listed here, they are not serviced by Mopar. You can then contact the Mopar Call Center at 1-800-84MOPAR to inquire if they can get non-serviced parts from the vendor. - Updated: May 3, 2002